Sharpe 1.4 mm RAZOR HVLP Pressure Feed Gun (24A5257)

Description

The Sharpe 1.4 mm RAZOR HVLP Pressure Feed Gun (24A5257) is a professional-grade spray gun designed for high-quality finishing applications in the automotive and industrial sectors. Engineered with a high-volume, low-pressure system, it delivers an exceptionally smooth and consistent spray pattern, making it ideal for applying a wide range of coatings, including base coats, clear coats, single-stage paints, and primers. This pressure-fed gun provides a continuous supply of material from an external pressure pot, ensuring uniform coverage on large or complex surfaces. Its ergonomic and lightweight design minimizes user fatigue, while stainless steel fluid passages, needle, and nozzle make it compatible with waterborne coatings and easy to clean. Made in the USA, the Sharpe RAZOR offers superior performance and low cost of ownership.

KEY FEATURES AND BENEFITS:

• Superior Finish Quality: Advanced air cap and nozzle design produce a smooth and consistent spray pattern for a professional-grade finish with minimal defects.
• High Efficiency: HVLP technology reduces overspray and material waste, resulting in higher transfer efficiency and cost savings.
• Ergonomic and User-Friendly Design: Lightweight body and low-trigger pull reduce strain during long painting sessions for improved comfort and control.
• Compatibility with a Wide Range of Coatings: Stainless steel fluid components allow the gun to handle both solvent-based and waterborne coatings.
• Low Maintenance: Long-life needle packings and easily accessible, affordable repair parts reduce downtime and cost of ownership.

SPECIFICATIONS:

• Fluid Tip Size: 1.4 mm
• Air Inlet Size: 1/4″ npsm (R 1/4 – 19)
• Fluid Inlet Size: 3/8″ npsm (R 3/8 – 19)
• Max. Air Inlet Pressure: 100 psi (0.7 MPa, 7 bar)
• Max. Fluid Inlet Pressure: 300 psi (2.1 MPa, 21 bar)
• Air Consumption: 14.4 CFM at 29 psi (0.2 MPa, 2.0 bar)
• Warranty: 3 years

HOW TO USE:

• Connect the Gun to the Pressure Pot: Attach the fluid hose from your pressure pot to the 3/8″ fluid inlet and the air hose to the 1/4″ air inlet, ensuring tight connections.
• Adjust the Pressure: Set the compressor air pressure to 29 psi and the pressure pot fluid pressure according to your material’s viscosity.
• Test Spray Pattern: Test on a scrap surface and adjust the fan pattern and fluid flow controls until achieving a consistent, oval-shaped pattern.
• Begin Painting: Hold the gun perpendicular at 6-8 inches from the surface, using smooth, overlapping strokes to ensure uniform coverage.
• Clean After Use: Flush the gun with appropriate solvent and disassemble the air cap and tip to thoroughly clean all components.

BENEFITS OF USING SHARPE 1.4 MM RAZOR HVLP PRESSURE FEED GUN (24A5257):

• Consistent Material Flow: Continuous and even paint supply eliminates stops and refills, improving efficiency.
• Reduced Atomization Pressure: Low-pressure operation minimizes bounce-back and overspray for more material on the surface.
• Versatility for Different Projects: Handles various fluid viscosities for automotive, furniture, and industrial projects.
• Improved Finish Quality: Controlled application delivers a smoother, professional finish with fewer runs and sags.

FEATURES:

• Nickel-plated or gray anodized finish for corrosion resistance and easy cleaning
• Precise airflow adjustments with intuitive fan pattern control
• Smooth-operating fluid control valve for fine-tuning material flow
• Ergonomic grip and balanced weight distribution to reduce fatigue
• Constructed from high-quality materials for long-term reliability
• Compatible with a wide range of pressure pots and pumps