ProPanel HD E 40

Description

ProPanel-HD E
is a precision measuring tool built and used like a caliper to make inside, outside, diagonal, hole-edge and hole-hole dimensional measurements. This is a rugged linear measuring tool is designed to make “on the manufacturing floor” measurements by one or two people.
It is based on the  ProScale Model 590  and is robust enough to span up to 100 inches of measuring range. It has a sliding carriage/jaw assembly that rides on 4 iGlide
™
 friction bearings to minimize encoder pitch and yaw.  Four removable alignment pins (shown in picture above) are included with the system for easy diagonal measurements. The optional Hole Measuring Kit containing 2 full and 1 half steel cones (see below) is available for hole measurements.
•
Battery Operation
: 1 CR123 Lithium battery lasts up to 12 months
LCD Readout:
 Low power LCD with Auto Off/On
L
arge, easy-to-read:
 .75 in (20mm) characters
Displays:
 decimal inches, fractions, millimeters, or centimeters
Five
 Operation Keys: 
Power, Units, Datum, Plus, Minus
Six Function Keys:
 ABS/INC, Data SEND, and 4 special function keys
Programmable Datum:
 use Datum key for zero or other value
Special Functions:
 Go/NoGo, Upper/Lower limit, Sum, Min, Max, Ave.
Scaling:
 Programmable Linear scaling factor
Lock-Out:
 Front panel keys and Readout programming
ProRF
:
 Wireless Data Transmitter ready