Phoenix USA 22.5″x7.5″-8.25″ Hub Pilot 5-Hand Rear Pair Axle (NH552R)

Description

Phoenix USA 22.5″x7.5″-8.25″ Hub Pilot 5-Hand Rear Pair Axle (NH552R) provides a practical and aesthetically pleasing upgrade for your vehicle’s rear dual wheel setup. Constructed from polished stainless steel, this kit offers a durable and corrosion-resistant solution to enhance the appearance of your truck or commercial vehicle. Designed for easy bolt-on installation, these simulators fit 22.5-inch diameter wheels with a width of 7.5 or 8.25 inches, utilizing a 10-lug configuration on a 285mm bolt circle and a hub pilot mounting system. This complete kit includes two rear wheel simulators and all the necessary mounting hardware, ensuring a straightforward installation process.

KEY FEATURES AND BENEFITS:

• Enhanced Aesthetics: The polished stainless steel finish provides a clean, bright, and professional look to your vehicle’s wheels.
• Durable Construction: Made from stainless steel, these simulators are built to withstand the rigors of road use and resist rust and corrosion.
• Precise Fitment: Specifically designed for 22.5″ wheels with 7.5″ or 8.25″ widths, a 10-lug on 285mm bolt circle, and hub pilot systems, ensuring a secure and proper fit.
• Simple Installation: The bolt-on design allows for quick and easy installation over your existing lug studs without the need to remove the lug nuts.
• Complete Kit: Includes a pair of rear simulators and all necessary mounting hardware for immediate installation.
• DOT Compliant: Meets Department of Transportation regulations, ensuring legality and non-violation of manufacturer warranties.
• Hub Access: Features pop-out centers for easy access to the wheel hubs without requiring full simulator removal.
• Contoured Design: The “deep dished” design follows the wheel’s contour for a seamless and integrated appearance.

SPECIFICATIONS:

• Product Name: Phoenix USA 22.5″x7.5″-8.25″ Hub Pilot 5-Hand Rear Pair Axle
• Model Number: NH552R
• Wheel Diameter: 22.5 inches
• Wheel Width Compatibility: 7.5 inches, 8.25 inches
• Lug Count: 10
• Bolt Circle: 285mm
• Hub Type: Hub Pilot
• Hand Holes: 5
• Material: Polished Stainless Steel
• Installation Type: Bolt-On (Over Lug)
• Included: 2 Rear Wheel Simulators, Mounting Hardware, Installation Tool, Instruction Sheet (where applicable)

HOW TO USE:

• Preparation: Ensure your vehicle is safely parked and the wheels are chocked. Gather the provided mounting hardware and installation tool.
• Positioning the Simulator: Carefully align one of the rear wheel simulators over the lug studs of your vehicle’s rear wheel.
• Securing the Simulator: Using the provided hardware (typically nuts or bolts), attach the simulator to the lug studs. Tighten the hardware evenly using the installation tool. Do not overtighten initially.
• Final Tightening: Once all the mounting hardware is in place and snug, go around and fully tighten each piece of hardware in a star or crisscross pattern to ensure even pressure and a secure fit. Refer to the instruction sheet if provided for specific torque recommendations.
• Repeat for Other Wheel: Follow the same steps to install the simulator on the other rear wheel.
• Hub Access: If you need to access the hub, locate the pop-out center cap on the simulator and gently remove it. Once access is no longer needed, firmly press the center cap back into place.
• Regular Checks: Periodically inspect the mounting hardware to ensure it remains tight and the simulators are securely fastened.

BENEFITS OF USING PHOENIX USA 22.5″x7.5″-8.25″ HUB PILOT 5-HAND REAR PAIR AXLE (NH552R):

• Improved Vehicle Appearance: Instantly upgrades the overall look of your truck or commercial vehicle, providing a more polished and professional image.
• Protection Against Elements: Offers a layer of protection to the underlying wheels from road debris, dirt, and potential minor damage.
• Cost-Effective Upgrade: Provides a significant visual enhancement without the expense of purchasing new custom wheels.
• Easy Maintenance: The stainless steel material is relatively easy to clean and maintain, helping to keep your vehicle looking its best.
• Maintains Vehicle Integrity: The bolt-on design does not require any permanent modifications to your vehicle’s wheels or hubs.
• Meets Regulatory Standards: Being DOT compliant ensures that the simulators meet safety and legal requirements.
• Convenient Hub Access: The pop-out centers simplify maintenance and inspections without the need for complete removal.

FEATURES:

• Polished stainless steel construction for a brilliant and lasting shine.
• Designed specifically for dual rear wheel configurations.
• Accommodates both 7.5-inch and 8.25-inch wide 22.5-inch diameter wheels.
• Engineered for hub pilot wheel mounting systems.
• Features a five-hand hole design element.
• Attaches securely using a 10-lug, 285mm bolt circle pattern.
• Installs directly over existing wheel studs with a bolt-on method.
• Comes as a matched pair for the rear axle.
• Includes all necessary hardware for a complete installation.
• Equipped with removable center caps for hub access.
• Shaped to closely match the wheel’s contours (“deep dished”).
• Complies with Department of Transportation (DOT) standards.