Phoenix USA 22.5″ x 9″ Hub Pilot 5-Hand Hole DOT Sim Set (NH5259)

Description

The Phoenix USA 22.5″ x 9″ Hub Pilot 5-Hand Hole DOT Sim Set (NH5259) offers a practical and visually appealing upgrade for your commercial vehicle’s dual rear wheel setup. This comprehensive kit includes four polished stainless steel wheel simulators, designed to seamlessly integrate with your existing wheels, providing a consistent and refined aesthetic. Engineered for durability and ease of installation, this set is a cost-effective way to enhance the overall look of your truck or trailer.

KEY FEATURES AND BENEFITS:

• Constructed from polished stainless steel, offering resistance to rust and corrosion for long-lasting performance and appearance.
• Includes a complete set of four simulators: two for the front (dished) and two for the rear (deep-dished to match wheel contour).
• Features pop-out center caps on both front and rear simulators, providing convenient access to hubs and valve stems for maintenance.
• Comes complete with all necessary mounting hardware, an installation tool, and detailed instructions for a straightforward setup.
• Offers a protective rolled edge design, enhancing both the strength of the simulators and safety during handling.
• Backed by a limited 3-year warranty (subject to retailer terms), providing peace of mind.

SPECIFICATIONS:

• Wheel Compatibility: 22.5″ x 9″ Dual Rear Wheels
• Lug Count: 10
• Bolt Circle Diameter: 285mm
• Number of Hand Holes: 5
• Pilot Type: Hub Pilot
• Lug Stud Size Compatibility: 22mm
• Material: Polished Stainless Steel
• Set Contents: 2 Front Simulators (Dished), 2 Rear Simulators (Deep-Dished), Mounting Hardware, Installation Tool, Instruction Sheet
• Installation Type: DOT Over-Lug, Bolt-On
• Estimated Set Weight: Approximately 44.55 lbs

HOW TO USE:

1. Preparation: Ensure your vehicle is parked on a level surface with the parking brake engaged. Gather all components of the Phoenix USA NH5259 simulator kit, including the front and rear simulators, mounting hardware, and the installation tool.
2. Identify Simulator Placement: Determine which simulators are designated for the front wheels (typically less deep) and which are for the rear dual wheels (deeper dish).
3. Position the Simulator: For each wheel, align the simulator over the wheel, ensuring the hand hole cutouts on the simulator match the hand holes on your wheel.
4. Secure with Mounting Hardware: Using the provided mounting hardware, typically consisting of brackets or clips, attach the simulator to the wheel. The DOT over-lug design usually involves securing the simulator using the existing lug nuts. Follow the instruction sheet for the specific attachment method.
5. Tighten Securely: Use the installation tool to firmly tighten the mounting hardware, ensuring the simulator is securely fastened to the wheel. Avoid over-tightening.
6. Install Center Caps: Once the simulator is securely in place, snap the pop-out center cap into the designated opening.
7. Repeat for Remaining Wheels: Follow steps 3 through 6 for the remaining three wheels.
8. Final Check: After installing all four simulators, double-check that each one is securely attached and that the center caps are properly in place.

BENEFITS OF USING THE PHOENIX USA 22.5″ X 9″ HUB PILOT 5-HAND HOLE DOT SIM SET (NH5259):

• Enhanced Vehicle Aesthetics: Significantly improves the overall appearance of your truck or trailer wheels, providing a clean and polished stainless steel look that enhances professionalism.
• Long-Term Cost Savings: The durable stainless steel construction resists rust and corrosion, reducing the need for frequent wheel refinishing or replacement due to cosmetic issues.
• Simplified Maintenance Access: The convenient pop-out center caps allow quick and easy access to the wheel hubs and valve stems for routine checks and maintenance without full simulator removal.
• Effortless Installation: The bolt-on, over-lug design allows for a fast and straightforward installation process, saving time and potential labor costs.
• Maintained Wheel Integrity: Designed to fit securely without altering the original wheel structure or interfering with the vehicle’s functionality.
• Increased Resale Value (Potential): A well-maintained and aesthetically pleasing vehicle may have a higher resale value.
• Professional Image: The polished stainless steel finish contributes to a more professional and well-maintained image for your vehicle and business.

FEATURES:

• Mirror-Polished Finish: Provides a bright, reflective surface that enhances the visual appeal of the wheels.
• Contoured Design: Front simulators are dished, while rear simulators are deep-dished to perfectly match the shape of dual rear wheels.
• Protective Rolled Edges: Adds strength to the simulator and provides a safer edge for handling during installation and removal.
• Non-Invasive Mounting: Utilizes existing lug nuts for attachment, preventing damage to the underlying wheels.
• All-Weather Performance: Stainless steel material is resistant to the elements, maintaining its appearance in various weather conditions.
• Balanced Weight Distribution: Designed to be lightweight enough to not significantly impact wheel balance.
• Direct Fit Application: Engineered specifically for the listed wheel specifications, ensuring a precise and secure fit.