Description
Looking to take the next step from a mill-drill or step pulley mill? Take a look at the Baileigh Industrial VM-949E-VS. This 9×49 workhorse is outfitted with a 3HP continuous duty motor requiring only 220V single phase power, making it perfect for hobbyists, small shops, and professionals alike. This knee mill has a familiar old-school feel, while having many creature comforts not typically found in this market range.
Baileigh VM-949E-VS Vertical Mill Features:
- Variable spindle speed by adjustable sheaves/pulleys – Control spindle RPM with the turn of a handle
- Infinitely adjustable variable speed from 60 to 4,200rpm – Allows tooling to run at its intended speed, resulted in longer tool life and better finishes
- R8 spindle and drawbar – Accepts the most common tooling
- Meehanite® Casting – Rigid and dependable for decades of use
- Spindle brake – Easier tool changes and quick spindle stops
- 3 speed power quill feed w/ manual wheel – Perfect for boring and accurate, consistent work
- DRO for X and Y axes
- Power feed X axis w/ rapid – Consistent travel speed without tiresome cranking
- Dovetail ways w/ adjustable gibs – Keep tolerances tight year after year
- Taiwan lead screws w/ backlash adjustable nuts – Remove backlash instead of compensating for it
- Way covers and wipers – Keep chips off ways and bed
- Integrated coolant system w/ splash guard – Large 6-gallon reservoir in the base houses the pump. Plumbed return line from the table eliminates overflow and messes
- LED work light
- One-shot lubricator – Keep up on lubrication maintenance by simply pulling a lever
Baileigh VM-949E-VS Specifications:
- Item Number: VM-949E-VS
- Spindle Speeds: 60 – 4,200RPM Infinitely Variable
- Distance from Spindle to Table: 18.5″
- Spindle Travel: 4.9″
- Spindle Speed Range: 60 to 4200 RPM
- Spindle Feeds: .003″ .0015″ .008″
- Power Feed: X axis
- Table Size: 9″ x 49″
- Range of Movement: 90° Left and Right, 45° Front and Back
- Spindle Diameter: 3.3″
- Motor: 3 hp
- X Axis Travel: 31-5/8″”
- Y Axis Travel: 11-a3/16″
- Z Axis Travel: 13-3/4″
- Spindle Taper: R8
- T Slots: .625″
- Power: 220V / 1-phase
- Shipping Weight: 1980lbs
- Drill Capacity: 2″
- Shipping Dimensions (Inches): 72x72x72
Reviews
There are no reviews yet.