Speedhut 2-5/8″ 30inhg-0-15PSI Boost/Vac Gauge w/Warning (R25-BV2-REV)

Description

The Speedhut 2-5/8″ 30inhg-0-15PSI Boost/Vac Gauge w/Warning (R25-BV2-REV) is a vital instrument for monitoring the performance and health of turbocharged or supercharged engines. This gauge accurately displays both intake manifold vacuum and turbocharger/supercharger boost pressure, providing crucial real-time data to the driver. Equipped with a high-quality 3-wire military-grade transducer, this gauge ensures precise and reliable readings within a range of 30 inches of mercury (inhg) for vacuum to 15 pounds per square inch (psi) for boost. Its standard 2 5/8 inch (68mm hole size) makes it a suitable fit for many aftermarket gauge pods and installations. The integrated warning light adds an extra layer of protection by alerting the driver to potentially harmful pressure levels.

KEY FEATURES AND BENEFITS:

• Accurate Monitoring: Provides precise readings of both boost (0-15 psi) and vacuum (30inhg) levels, essential for understanding engine performance.
• Reliable Sensor: Features a 3-wire military-grade transducer, ensuring accurate and consistent pressure readings under various operating conditions.
• Early Warning System: Integrated warning light allows users to set pressure thresholds, providing a visual alert if these limits are exceeded, helping to prevent potential engine damage.
• Standard Size: The 2 5/8 inch (68mm hole size) offers compatibility with a wide range of aftermarket gauge mounting solutions.
• Complete Installation Kit: Ships with all necessary wiring harnesses (power/lighting and pressure sensor) and a boost/vacuum hose kit, simplifying the installation process.

SPECIFICATIONS:

• Gauge Type: Boost/Vacuum Gauge
• Range: 30inhg – 0 – 15 psi
• Size: 2 5/8 inch
• Hole Size: 2.67 inches (68mm)
• Pressure Sender Type: 3-Wire Military Grade Transducer (Performance)
• Standard or Metric: Standard
• Warning Light: Yes
• Included:
• 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks
• Pressure Sensor – 30 psi
• Pressure Gauge Wiring Harness (3-Wire Cable)
• Boost/Vac Hose Kit

HOW TO USE:

1. Mount the Gauge: Securely install the 2 5/8 inch gauge in your desired location using a compatible gauge pod or mounting solution. Ensure the 2.67-inch (68mm) hole size is appropriate.
2. Connect the Pressure Sensor: Locate a suitable vacuum/boost source on your engine’s intake manifold. Connect one end of the provided boost/vac hose to this source and the other end to the included pressure sensor.
3. Wire the Pressure Sensor: Connect the 3-wire cable from the pressure sensor to the back of the gauge, ensuring correct terminal connections as indicated in the product’s wiring diagram (if provided).
4. Connect Power and Lighting: Attach the 3 ft power and lighting harness to the designated terminals on the back of the gauge. Connect the power wire (typically red) to a switched 12V power source in your vehicle. Connect the ground wire (typically black) to a suitable ground point. Connect the lighting wire (often orange or similar) to your vehicle’s lighting circuit if you desire the gauge to illuminate with your headlights.
5. Set the Warning Threshold (if applicable): Refer to the product’s instructions on how to set the desired boost or vacuum level at which the warning light will activate. This usually involves adjusting a setting on the gauge itself.
6. Verify Operation: Start your vehicle and observe the gauge readings under various engine loads to ensure it is functioning correctly and displaying accurate boost and vacuum levels. Check if the warning light activates when the set thresholds are exceeded.

BENEFITS OF USING THE SPEEDHUT 2-5/8″ 30INHG-0-15PSI BOOST/VAC GAUGE W/WARNING (R25-BV2-REV):

• Enhanced Engine Awareness: Provides real-time information about critical engine pressures, allowing you to monitor performance and identify potential issues early.
• Proactive Engine Protection: The integrated warning light helps prevent over-boosting or excessively low vacuum conditions that could lead to engine damage.
• Optimized Performance: By accurately monitoring boost levels, you can ensure your engine is operating within its intended parameters for optimal power and efficiency.
• Simplified Installation: The inclusion of all necessary wiring and hose components streamlines the installation process, saving time and effort.
• Reliable and Accurate Readings: The military-grade transducer ensures consistent and precise measurements, giving you confidence in the data displayed.

FEATURES:

• Displays both vacuum levels up to 30 inches of mercury (inhg) and boost pressure up to 15 pounds per square inch (psi).
• Utilizes a high-performance 3-wire transducer for accurate pressure sensing.
• Includes a visual warning light to alert the driver of abnormal pressure readings.
• Designed with a standard 2 5/8 inch diameter for versatile mounting options.
• Requires a 2.67-inch (68mm) diameter opening for installation.
• Operates on standard units of measurement (inhg and psi).
• Comes with a 3-foot power and lighting harness for easy electrical connection.
• Includes a dedicated wiring harness for the pressure sensor.
• Supplied with a complete boost/vacuum hose kit for connection to the engine.