Mayhew 12-Pieces Blast Finish Punch & Chisel Set (61040)

Description

The Mayhew 12-Pieces Blast Finish Punch & Chisel Set (61040) is an essential collection of hand tools designed for a wide array of precision tasks in metalworking, automotive repair, and general workshop applications. This comprehensive set provides the necessary implements for operations ranging from precise material removal and shaping to the critical tasks of driving and extracting pins. Each tool within this set is crafted to meet practical demands, offering dependable performance for your projects. Made in the USA, this set reflects a commitment to functional design and manufacturing, ensuring that you have reliable tools at hand for various applications.

KEY FEATURES AND BENEFITS:

• Comprehensive 12-Piece Collection: This set includes a variety of punches and chisels, providing a versatile array of tools for different tasks such as cutting, shaping, marking, and pin removal.
• Enhanced Strength and Rust Protection: Each tool is heat-treated to ensure maximum strength for consistent performance, and features a black oxide finish, which provides effective resistance against rust and corrosion.
• Task-Specific Tool Design: The set contains solid punches for loosening stubborn pins, pin punches for fully driving out freed pins, and center punches ideal for creating precise starting points for drilling.
• USA Manufacturing: These tools are manufactured in the USA using U.S. and global components, indicating a commitment to quality control and design.

SPECIFICATIONS:

• Product Details:
• Weight: 2 lbs.
• Length: 15.75″
• Width: 5″
• Height: 0.75″
• Brand: Mayhew
• Finish Type: Blast Finish (Black Oxide)
• Included in the Set (when purchased/shipped):
• 3/8″ Center Punch, 5/32″ Point (Item # 74002)
• 1/4″ Cold Chisel (Item # 70200)
• 3/8″ Cold Chisel (Item # 70202)
• 5/8″ Cold Chisel (Item # 70209)
• 5/32″ Line-Up Punch (Item # 72011)
• 3/32″ Pin Punch (Item # 71001)
• 1/8″ Pin Punch (Item # 71002)
• 5/32″ Pin Punch (Item # 71003)
• 3/16″ Pin Punch (Item # 71004)
• 1/4″ Pin Punch (Item # 71005)
• 3/8″ Prick Punch (Item # 73002)
• 1/8″ Solid Punch (Item # 70001)

HOW TO USE:

1. For Starting Drill Holes: Select the center punch (3/8″ with 5/32″ point). Position the point precisely where you intend to start a drill hole. Hold the punch firmly and strike the head with a hammer to create an indentation, guiding the drill bit.
2. For Loosening Seized Pins or Keys: Choose a solid punch (e.g., 1/8″ solid punch) that is slightly smaller than the pin’s diameter. Place the punch squarely on the end of the pin. Strike the punch with controlled, firm hammer blows to initially move the seized pin or key.
3. For Driving Out Loosened Pins or Keys: Once a pin or key is loosened, switch to a pin punch (various sizes, e.g., 3/32″, 1/8″). Select a pin punch with a tip diameter just under the pin’s diameter. Place the pin punch on the pin and continue striking with a hammer until the pin is fully driven out.
4. For Cutting or Shaping Metal: Select the appropriate cold chisel (e.g., 1/4″, 3/8″, 5/8″) based on the material and desired cut. Position the cutting edge of the chisel at the desired cut line or angle. Strike the head of the chisel with a hammer, guiding the cut as you go.
5. For Aligning Holes: Use the line-up punch (5/32″) to align two or more pieces of material with misaligned holes. Insert the tapered tip of the punch into the holes and use gentle pressure or light hammer taps to adjust the alignment until the holes are concentric.
6. For Precise Marking: Utilize the prick punch (3/8″) for creating very small, precise marks on material surfaces before using a center punch or for layout work. Place the sharp point on the desired mark and tap lightly with a hammer.
7. Safety Tip: Always wear appropriate safety glasses when using punches and chisels to protect your eyes from flying debris.

BENEFITS OF USING MAYHEW 12-PIECES BLAST FINISH PUNCH & CHISEL SET (61040):

• Versatile Application Range: This set provides tools for a broad spectrum of tasks, reducing the need for multiple individual tool purchases.
• Dependable Performance: The heat-treated construction ensures that each tool maintains its shape and function through repeated use.
• Corrosion Resistance: The black oxide finish protects the tools from rust, extending their lifespan and maintaining their appearance over time.
• Precision in Operation: The variety of punch types allows for accurate hole starting, effective pin removal, and precise material marking.
• Quality Manufacturing: Being made in the USA, users can expect a consistent level of manufacturing and material quality for reliable work.

FEATURES:

• Includes a variety of cold chisels for cutting, shaping, and removing material.
• Contains multiple pin punches to assist in driving out various sizes of loosened pins.
• Features a solid punch designed to help free seized or stubborn pins initially.
• Equipped with a center punch for creating accurate indentations to start drill bits.
• Incorporates a line-up punch for precisely aligning holes in different components.
• Includes a prick punch for making fine, initial layout marks.
• Individual tools are identifiable by their Mayhew item numbers (e.g., 74002, 70200).
• Comes in a compact overall dimension, making storage straightforward.