Speedhut 2-5/8″ Volts / Fuel Level Dual Gauge (R25-DG2-REV)

Description

The Speedhut 2-5/8″ Volts / Fuel Level Dual Gauge (R25-DG2-REV) provides a space-saving and efficient solution for monitoring two essential vehicle systems in a single, easy-to-read instrument. This dual gauge displays both the vehicle’s voltage and the current fuel level, offering crucial information at a glance. Designed for straightforward installation and reliable performance, it’s an excellent addition to any vehicle where monitoring these parameters is important.

KEY FEATURES AND BENEFITS:

• Dual Functionality: Combines a voltmeter (6-18V range) and a fuel level gauge (Empty to Full) in one unit, reducing clutter on your dashboard.
• Clear Display: The 2-5/8 inch size offers good visibility of both readings.
• Easy Installation: Designed to fit a standard 2.67″ (68mm) mounting hole, and includes a mounting ring for secure placement.
• Included Wiring: Comes with a 2-wire cable wiring harness and a 3 ft Power & Lighting Harness, simplifying the electrical connections.
• Early Warning System: Features an integrated warning light to alert you to potential voltage drops or low fuel levels.
• Convenient Monitoring: Allows for continuous monitoring of your vehicle’s electrical health and fuel status.

SPECIFICATIONS:

• Gauge Type: Dual Gauge
• Combo Options: Voltage and Fuel Level
• Voltage Range: 6-18 volts
• Fuel Level Range: E-F
• Size: 2 5/8 inch
• Hole Size: 2.67 inches (68mm)
• Warning Light: Yes
• Gauge Mounting Ring: Included
• Ships With:
• Wiring Harness (2-Wire Cable)
• 3 ft Power & Lighting Harness – for LED Lit Gauges and Clocks

HOW TO USE:

• Mount the Gauge: Locate a suitable 2.67″ (68mm) diameter opening on your dashboard. Insert the gauge into the opening from the front. Secure it from the back using the included gauge mounting ring.
• Connect the Power and Lighting Harness: Connect the 3 ft Power & Lighting Harness to the appropriate power source in your vehicle (typically a switched 12V source), ground, and lighting circuit if you desire the gauge to illuminate with your other instrument panel lights.
• Connect the Voltage Input: Connect the designated wires from the 2-wire cable wiring harness to a reliable source of your vehicle’s voltage. Ensure correct polarity.
• Connect the Fuel Level Sender: Connect the remaining wires from the 2-wire cable wiring harness to the output signal wire from your vehicle’s fuel level sending unit and its corresponding ground (if required by your sender). Consult your vehicle’s wiring diagram for the correct connections.
• Test the Gauge: Once all connections are made, turn on your vehicle’s ignition. The voltage gauge should display the current voltage. The fuel level gauge should indicate the approximate fuel level in your tank. Verify the warning light functionality as per the manufacturer’s instructions (it may illuminate under specific voltage or fuel level conditions).

BENEFITS OF USING THE SPEEDHUT 2-5/8″ VOLTS / FUEL LEVEL DUAL GAUGE (R25-DG2-REV):

• Space Optimization: Combines two critical readings into a single gauge, freeing up valuable dashboard space for other instruments or controls.
• Enhanced Awareness: Provides continuous, real-time information about your vehicle’s electrical system and fuel level, helping you anticipate potential issues before they become major problems.
• Simplified Monitoring: Allows you to check two essential parameters with a quick glance, improving driving safety and convenience.
• Clean Aesthetics: Offers a streamlined and integrated look compared to installing separate gauges.
• Early Problem Detection: The integrated warning light can alert you to low voltage conditions that might indicate battery or charging system problems, as well as low fuel levels, prompting timely action.

FEATURES:

• Integrated Voltage Display: Clearly shows your vehicle’s electrical system status within a 6 to 18 volt range.
• Direct Fuel Level Indication: Presents the amount of fuel in your tank from Empty to Full.
• Standard Size Compatibility: Designed to fit common 2 5/8 inch (68mm) dashboard openings.
• Secure Mounting System: The included ring ensures the gauge stays firmly in place.
• Basic Wiring Included: Comes with essential harnesses for power, lighting, and signal connections.
• Visual Alert System: A dedicated warning light can signal critical low voltage or fuel level conditions.